Within AudaGraphics, there is now functionality to select the delivery condition of plastic parts that require painting (LE and LE 2/3/4) for a New Part Paint operation, eradicating the need to apply any further uplift to the calculation. The delivery state selected will have implications on the amount of paint labour and materials generated. When clicking on the New Part Paint option, another tab will then appearing giving the option to select either LE, LE2, LE3 or LE4.
Below, information can be found regarding the painting procedure to help indicate which delivery condition should be chosen within AudaGraphics.
|AX Paint Level||AZT Paint Level||Painting Procedure|
|LE1||(K1R)||No priming required, only requires colour coats/clear coats.|
|LE2||(K1N)||For new plastic parts which arrive un-primed. Requires priming and then application of and colour coat/clear coats.|
|LE3||(K1G - Hard/Glass Fibre)||For new plastic parts which arrive un-primed. where there is need to dry flat E.G hard plastic/glass fibre. followed by primer and colour coats/clear coats.|
|LE4||(K1G - Soft/Polyurethane)||For new plastic parts which arrive un-primed. where there is need to dry flat E.G Soft plastics/soft foam followed by primer and colour coats/clear coats. (with additional elastification)|